HP Proliant Gen9 ILO 4 Monitoring Zabbix 4

Tested on HP Proliant 380 Gen9 + Zabbix 3.0 (Centos7 x86_64)
Zabbix template IPMI DL380 Gen9 (Gen5,7,8) as per link below.

Steps to install.

1. HP iLO web interface: Administration -> User Administration
— create user Zabbix with Administrator privileges
— Access Settings:
IPMI/DCMI over LAN Access -> Enable
IPMI/DCMI over LAN Port -> 623

2. Zabbix web interface: Administration-> General -> Value mapping.
Create value map as follows:

1) Server HP Fan
0 ⇒ Failure
1 ⇒ OK

2) Server HP Health
0 ⇒ OK
1 ⇒ Error

Click image for larger version

Name: zabbix_screen.png
Views: 3089
Size: 6.1 KB
ID: 355586

3. Configuration -> Templates
— import template HP_DL380_g9.xml.

4. Zabbix server. Install the following apps if not installed.
— freeipmi
— openipmi
IMPORTANT: openipmi should be with openssl support.
Centos7 openipmi already precompiled with openssl.

5. vim /etc/zabbix/zabbix_server.conf
StartIPMIPollers=5
service zabbix-server restart

6. Zabbix web interface. Configuration -> hosts
— Create host -> interface IPMI
— type IP of iLO interface.
— add template above
— IPMI:
Authentication algorithm: RMCP+
Privilege level: Admin
— type Username/password (Zabbix/Password).

 

https://share.zabbix.com/cat-server-hardware/hp/hp-ilo4-snmp-agentless-simple-template

Добавить комментарий

Ваш адрес email не будет опубликован.

Этот сайт использует Akismet для борьбы со спамом. Узнайте, как обрабатываются ваши данные комментариев.